Filter
Top Products
16
GB
You can play all the tracks or a single track on a
disc repeatedly.
Press REPEAT repeatedly during playback
until “REP” or “REP 1” appears.
REP: For all the tracks on the disc up to five
times.
REP 1: For a single track only.
To cancel Repeat Play
Press REPEAT repeatedly until both “REP” and
“REP 1” disappear.
Notes
• You cannot select “REP” and “ALL DISCS SHUF”
at the same time.
• When you select “REP 1”, that track is repeated
endlessly until “REP 1” is canceled.
You can make a program of up to 25 steps from
all the discs in the order you want to play them.
You can synchro record the programmed tracks
onto a cassette tape (page 22).
Using the remote
1 Press CD (or FUNCTION repeatedly) to
switch the function to CD.
2 Press PLAY MODE repeatedly in stop
mode until “PGM” appears.
3 Press DISC SKIP repeatedly (or press
one of the disc buttons (DISC 1 – 5) on
the unit) to select a disc.
To program all the tracks on a disc at once,
proceed to step 5 with “ALL” displayed.
4 Press . or > repeatedly until the
desired track number appears.
When programming the tracks on the
ATRAC CD or MP3 CD, press + or –
repeatedly to select the desired group, then
press . or > repeatedly until the
desired track number appears.
5 Press ENTER.
The track is programmed.
The program step number appears,
followed by the last programmed track
number and total playing time.
Playing repeatedly
— Repeat Play
Creating your own
program
—Program Play
Selected track number
Total playing timeCurrent disc