Filter
Top Products
14
GB
You can wake up to music at a preset time. Make
sure you have set the clock (see “Setting the
clock” on page 5).
Use buttons on the remote for the operation.
1
Prepare the sound source you want to
play.
• CD: Load a disc. To start from a specific
track, make a program (see “Creating
your own program” on page 7).
• TAPE: Load a tape.
• TUNER: Tune in a radio station (see
“Listening to the radio” on page 9).
2
Press CLOCK/TIMER SET.
3
Press ./> repeatedly until
“PLAY” appears, then press CLOCK/
TIMER SET.
“ON TIME” appears and the hour
indication flashes.
4
Set the time to start playback.
Press ./> repeatedly to set the hour,
then press CLOCK/TIMER SET.
The minute indication flashes.
Press ./> repeatedly to set the
minute, then press CLOCK/TIMER SET.
5
Set the time to stop playback following
the same procedure as step 4.
6
Press ./> repeatedly depending
on the sound source you want to play.
Each time you press the button, the display
changes cyclically as follows:
CD t TAPE t TUNER
7
Adjust the volume.
8
Press CLOCK/TIMER SET.
9
Press ?/1 to turn off the system.
Other operations
Notes
• If you use the Daily Timer and the Sleep Timer at the
same time, the Sleep Timer has priority.
• Do not operate the system from the time the system
turns on until the play starts (about 15 seconds before
the preset time).
• If the system is on about 15 seconds before the preset
time, the Daily Timer will not be activated.
• You cannot use the optional component connected to
MD IN jacks as sound sources for the Daily Timer.
Waking up to music
— Daily Timer
To Do this
Change the setting Start over from step 1.
Activate the timer Press CLOCK/TIMER
SELECT repeatedly until
“PLAY” appears, then press
CLOCK/TIMER SET.
Cancel the timer Press CLOCK/TIMER
SELECT repeatedly until
“OFF” appears, then press
CLOCK/TIMER SET.