Filter
Top Products
16
GB
The clock display can be turned off to minimize
the amount of power consumed during standby
(Power Saving Mode).
Press DISPLAY repeatedly while the
system is off until the clock display
disappears.
To cancel Power Saving Mode
Press DISPLAY while the system is off. Each
time you press the button, the display switches
cyclically as follows:
Clock display* y No display (Power Saving
Mode)
* The clock is displayed only if you set the clock.
Tips
• ?/1 indicator lights up even in the Power Saving
Mode.
• The timer continues to operate in Power Saving
Mode.
Note
You cannot perform the following operations in Power
Saving Mode.
– setting the clock
– changing the AM tuning interval (except for
European models)
– turning on the system by pressing the function
buttons
– switching the MD (VIDEO) function
You can check the playing time and remaining
time of the current track or that of the disc.
Checking the remaining time
(CD)
Press DISPLAY during Normal Play.
Each time you press the button, the display
changes cyclically as follows:
Current track number and elapsed playing time
t Current track number and remaining time t
Remaining time of the current disc t Clock
display t Bass level t Treble level
Checking the total playing
time (CD)
Press DISPLAY in stop mode.
Each time you press the button, the display
changes cyclically as follows:
Total playing time t Clock display t Bass
level t Treble level
Display
Turning off the display
— Power Saving Mode
Viewing information
about the disc in the
display