Filter
Top Products
14
GB
You can wake up to music at a preset time. Make
sure you have set the clock (see “Setting the
clock” on page 5).
1 Prepare the sound source you want to
play.
• CD: Load a disc. To start from a specific
track, make a program (see “Creating
your own program” on page 7).
• TAPE: Load a tape (see “Playing a tape”
on page 11).
• TUNER: Tune in the preset radio station
(see “Listening to the radio” on page 10).
2 Press VOL + or – to adjust the volume.
3 Press CLOCK/TIMER SET.
4 Press . or > repeatedly until
“DAILY” appears, then press ENTER.
“ON TIME” appears and the hour
indication flashes.
5 Set the time to start playing.
Press . or > repeatedly to set the
hour, then press ENTER.
The minute indication flashes.
Press . or > repeatedly to set the
minute, then press ENTER.
6 Set the time to stop playing following
the same procedure as step 5.
7 Press . or > repeatedly until the
desired sound source appears.
Each time you press the button, the display
changes cyclically as follows:
8 Press ENTER.
The start time, the stop time, the sound
source and VOLUME appear in turn, then
the original display returns.
9 Press ?/1 to turn off the system.
Other operations
Notes
• The Daily Timer setting or the Timer Recording
setting overlaps with part or all of another timer
setting.
• If you use the Daily Timer and the Sleep Timer at the
same time, the Sleep Timer has priority.
• Do not operate the system from the time the system
turns on until the play starts (about 15 seconds before
the preset time).
• If the system is on about 15 seconds before the preset
time, the Daily Timer will not be activated.
• You cannot use the optional component connected to
MD (VIDEO) IN jacks as the sound source for Daily
Timer.
• When the Daily Timer is set to “OFF”, “SELECT”
does not appear. However, “SELECT” does appear
when the Timer Recording is set to “ON”.
Waking up to music
— Daily Timer
t
TUNER
y
CD PLAY
T
t
TAPE PLAY
T
To Do this
Cancel the timer/
activate the timer/
check the settings
1 Press CLOCK/TIMER
SELECT.
2 Press . or >
repeatedly until “SELECT”
appears, then press ENTER.
3 Press . or >
repeatedly until “DAILY”,
“ON” or “OFF” appears,
then press ENTER.
Change the setting Start over from step 1.
Cancel both Daily
Timer and Timer
Recording
1 Press CLOCK/TIMER
SELECT.
2 Press . or >
repeatedly until “OFF”
appears, then press ENTER.