Filter
Top Products
Timer
15
GB
To timer record, you must first preset the radio
station (see “Presetting radio stations” on
page 8) and set the clock (see “Setting the clock”
on page 5).
1 Tune in the preset radio station (see
“Listening to a preset station” on
page 10).
2 Press CLOCK/TIMER SET.
3 Press . or > repeatedly until
“REC” appears, then press ENTER.
“ON TIME” appears and the hour
indication flashes.
4 Set the time to start recording.
Press . or > repeatedly to set the
hour, then press ENTER.
The minute indication flashes.
Press . or > repeatedly to set the
minute, then press ENTER.
5 Set the time to stop recording following
the same procedure as step 4.
Timer Recording settings and the desired
station appear, then the original display
returns.
6 Load a recordable tape.
7 Press DIRECTION repeatedly until g
appears to record on one side or h (or
j) to record on both sides.
8 Press TAPE nN repeatedly to select
recording side.
If you select both sides recording or front
side recording, press TAPE nN to light
up the N indicator. If you record on the
reverse side, press TAPE nN again to
light up the n indicator.
9 Press ?/1 to turn off the system.
Other operations
Notes
• The Daily Timer setting or the Timer Recording
setting overlaps with part or all of another timer
setting.
• If you use the Timer Recording and the Sleep Timer
at the same time, the Sleep Timer has priority.
• Do not operate the system from the time the system
turns on until the recording starts (about 15 seconds
before the preset time).
• If the system is on about 15 seconds before the preset
time, the Timer Recording will not be activated.
• The volume is reduced to minimum during
recording.
• Note that if the Timer Recording is set at the same
time as the Daily Timer sound source is set to tape,
the Timer Recording sound may be recorded onto the
tape.
• When the Timer Recording is set to “OFF”,
“SELECT” does not appear. However, “SELECT”
does appear when the Daily Timer is set to “ON”.
Timer recording radio
programs
To Do this
Cancel the timer/
activate the timer/
check the settings
1 Press CLOCK/TIMER
SELECT.
2 Press . or >
repeatedly until “SELECT”
appears, then press ENTER.
3 Press . or >
repeatedly until “REC”,
“ON” or “OFF” appears,
then press ENTER.
Change the setting Start over from step 1.
Cancel both Daily
Timer and Timer
Recording
1 Press CLOCK/TIMER
SELECT.
2 Press . or >
repeatedly until “OFF”
appears, then press ENTER.