Filter
Top Products
Storing Information About CDs (Custom Files)
32
EN
JOGSHUFFLE
CHECK
1 Press CONTINUE or SHUFFLE before you start
playing.
2 Turn the JOG dial to select the disc.
3 Press CHECK repeatedly until the track you want
to delete appears in the display.
CLEAR
Storing Specific Tracks
(Delete Bank)
You can delete unwanted tracks and store only the
tracks you want. When you select the disc containing a
Delete Bank, the player will play only the remaining
tracks.
Storing Custom File
Information Using a Keyboard
You can store the Disc Memo for each disc, one by one,
using an IBM-compatible PC keyboard* (not supplied).
* Power consumption must be 120 mA or less.
1 Connect a keyboard to the keyboard jack on the
front panel of the player.
Keyboard jack
CONTINUE
To correct the character currently being input
1 Press DEL to delete the incorrect character.
2 Input the correct character.
To insert a character between the input characters
Press MEMO INPUT ? or / until the cursor moves
next to the point you want to insert, and enter the
character.
You can label discs of the second CD player using the
remote Z
Press PLAYER SELECT to select the second CD player,
then repeat Steps 1 to 7.
2 After selecting the desired disc on the player, press
the Enter key.
3 Input the desired characters, then press the Enter
key or Esc key to store the information.
You can delete all characters of selected item
While holding down the Shift key, press the Delete key.
ALL DISCS
CD1
DISC
TRACK
20
201ON
'
~
=
+
1
!
2
@
3
#
4
$
5
%
6
^
7
&
89
(
0
)
-
-
]
}
WERTYU I OPQ
[
{
SDFGHJKLACaps Lock
Enter
XCVBNM<>Z
Shift
?
Shift
Ctrl Alt Alt Ctrl
Notes
• If the cursor keys do not work correctly and you cannot
complete the task using the keyboard, disconnect the
keyboard then reconnect it to the player and try again.
• If the keyboard is not the USA model, the characters may be
input differently from those on the keys.
The USA keyboard layout is shown below.