Filter
Top Products
31
US
Playing Discs
–
–
+
+
PRESET
Playing Discs
Depending on the DVD or VIDEO CD,
some operations may be different or
restricted.
Refer to the operating instructions supplied
with your disc.
1 Turn on your TV.
2 Switch the input selector on the TV
to this receiver.
3 Press POWER on the receiver.
The receiver enters standby mode and
the STANDBY indicator lights up in
red.
Playing Discs
4 Press A on the receiver, and
place a disc on the disc tray.
The receiver automatically turns on
and the STANDBY indicator turns off.
5 Press H.
The disc tray closes, and the receiver
starts playback (continuous play).
Adjust the volume on the receiver.
After following Step 5
Depending on the disc, a menu may appear
on the TV screen. You can play the disc
interactively by following the instructions
on the menu. DVD (page 33), VIDEO CD
(page 34).
To turn on the receiver
Press POWER on the receiver. The receiver
enters standby mode and the STANDBY
indicator lights up in red. Press [/1 on the
remote. The receiver turns on and the
STANDBY indicator turns off. In standby
mode, the receiver also turns on by pressing
A on the receiver or by pressing H.
To turn off the receiver
Press [/1 on the remote. The receiver enters
standby mode and the STANDBY indicator
lights up in red. To turn off the receiver
completely, press POWER on the receiver.
While playing a disc, do not turn off the
receiver by pressing POWER. Doing so may
cancel the menu settings. When you turn off
the receiver, first press x to stop playback
and then press [/1 on the remote.
POWER
STANDBY indicator
A
H
x
Adjust the volume
Connect
headphones
With the playback side facing down
continued
x
H
[/1