Filter
Top Products
30
US
5 Press ENTER.
The station is stored.
6 Repeat 1 to 5 to store other stations.
To tune in a station with a weak signal
Press m or M repeatedly in 2 to tune in the station manually.
To change the preset number
Start over from 1.
To change the AM tuning interval
The AM tuning interval is factory set to 9 kHz (10 kHz in some areas).
To change the AM tuning interval, tune in any AM station first, then turn off the receiver by
pressing [/1 on the remote. While holding down x (on the receiver), turn on the power using
the remote. When you change the interval, AM preset stations will be erased.
To reset the interval, repeat the same procedure.
TUNED ST
FM
MHz
v