Filter
Top Products
7
CH 1 IN
VOL
010
3HOT
2HOT
54
2
1
3
4 DIRECT switch (Only for Balanced
input terminal)
Setting this switch to DIRECT allows you
to bypass the tone controls and send the
sound from a mixer (etc.) directly to the
speaker's power amplifier. In this case,
BASS and TREBLE adjustments are not
possible. Only the MASTER VOL. and TW
LEVEL can be adjusted.
Note
When the DIRECT switch is set to DIRECT, no
sound will be output to the other speakers (if
other speakers are connected).
5 Balanced input terminal
6 Balanced input terminal polarity
switch
CH 1 input
1 INPUT VOL. (channel 1 input level)
control
Turning to the right increases the level of
the sound output from the channnel 1
2 Pin plug input terminal
Phono plug input terminal for channel 1.
Connect to the output on a piece of audio
equipment (etc.).
3 Standard plug input terminal
phone plug input terminal for channel 1.
Connect to the output on a musical
instrument (etc.).
4 Balanced input terminal
Balanced input terminal for channel 1.
Connect the the out put terminal of a
professionl mixing console (etc).
5 Balanced input terminal polarity
switch
Use to switch the polarity of the channel 1
balanced input terminal.
CH 2 IN
VOL
010
3HOT
2HOT
CH IN
DIRECT
1
4
32
5
6
CH 2 input
1 INPUT VOLUME. (channel 2 input
level) control
2 Pin plug input terminal
3 Standard plug input terminal
1
POWER
1 Power Indicator
Lights when the POWER switch is set to
the ON position.
Front