Filter
Top Products
SEP-30BT 3-870-834-31(1)
54
SEP-30BT 3-870-834-31(1)
55
Symptom Cause/Remedy
A connection cannot be established. The Bluetooth device to be connected does not support
the SCMS-T system.
On the [Tools] menu of Rolly Choreographer, select
[Rolly Settings] - [Bluetooth Communication]
- [Copyright Protection] - [Copyright Protection]
- [Disable SCMS-T method content protection].
Others
Symptom Cause/Remedy
The arm was detached. Attach the arm as described on page 11.
The wheel was detached Attach the wheel as described on page 11.
Others
Bluetooth communication
Symptom Cause/Remedy
The sound of the connected
Bluetooth device is not heard.
The sound is silenced on the paired Bluetooth device.
Turn up the volume on the paired Bluetooth device.
The volume may be set to the minimum.
Adjust the volume (
page 30).
Noise is generated. Noise may be generated depending on the environment
in which the connection with the Bluetooth device was
established.
Try establishing the connection with the Bluetooth
device again.
Pairing cannot be done. The player is too far from the Bluetooth device to be
paired.
Place the player and the Bluetooth device closer and
perform the pairing operation.
Make sure that the paired Bluetooth device supports the
A2DP profile.
The sound is heard intermittently. There are obstacles (metal objects, persons, walls, etc.)
between the player and the paired Bluetooth device.
Avoid or remove the obstacles.
If there is equipment that generates electromagnetic
radiation, such as a wireless LAN, other Bluetooth device,
or a microwave oven nearby, move them away.
If Bluetooth devices other than the player are connected
to the paired Bluetooth device, the music played on the
Bluetooth device may sound intermittently through the
speakers of the player. If this happens, disconnect the
other Bluetooth devices from the paired Bluetooth device.
Troubleshooting (continued)