Sony SANS500 Speaker User Manual


 
17
GB
Network Connections
How to Connect Your
Network
Set up the network after checking your
network environment. Refer to the following
descriptions.
Wireless Network:
Set up your network using the supplied
CD-ROM. Refer to the leaflet “Preparations
for listening to music via your home network”
for details.
Refer to option 1 when you set up your
network manually.
Option 1: Manual wireless setup
WPS Compliant Wireless
Network:
Option 2: WPS push button configuration
method (page 19)
Option 3: PIN method (page 20)
Wired network:
Option 4: DHCP method (page 21)
Option 5: Fixed IP method (page 21)
Tip
You can set up a wireless network using a fixed IP
address. Refer to the instructions for a wired
network (page 21).
When a problem occurs while
you are making the network
settings
Press ALL RESET button on the bottom of the
unit with a pointed object (such as a small pin)
(page 12).
Setting Up Wireless
Networks
Your computer must be connected to the
wireless LAN router/access point in advance.
Write down important information such as the
SSID and security method, etc. of your
wireless LAN router/access point.
Refer to the operating instructions of the
router.
1 Check whether your computer
and wireless LAN router/
access point are turned on.
2 Connect the unit and the
wireless LAN router/access
point using a network (LAN)
cable.
3 Turn the unit on.
4 Click [My Network] or [Network]
t [SA-NS500].
The [Sony Network Device Setting]
screen appears.
Network Connections
Option 1: Manual wireless setup
SSID
Security method
Security key
(WEP/WPA key,
etc.)
Network
(LAN) cable