Filter
Top Products
15
GB
Getting Started
Replacing the battery of the
remote control
If the remote control stops working, replace
the battery (CR2025) with a new one.
1 Pull out the battery holder.
2 Remove the old battery from the battery
holder and then insert a new battery.
3 Reinsert the battery holder into the remote
control.
Turning the Unit On or Off
Set the OPERATE ON/OFF switch
to ON
The ?/1 (on/standby) indicator flashes in
green and the illumination indicator lights up.
You can operate this unit when the ?/1 (on/
standby) indicator lights up in green and the
illumination indicator lights up. It may take a
while.
To set the network standby
mode
1 Set the STANDBY MODE switch to
NETWORK STANDBY.
2 Press the ?/1 (on/standby) button.
The ?/1 (on/standby) indicator lights up in
amber.