Filter
Top Products
15
GB
Network Connections
Notes
• Install the UPnP service in advance if you are
using Windows XP (page 28).
•Refer to “Setting Screen on the Browser”
(page 27) for details on the display of [My
Network] or [Network].
•Check your set-up of the firewall of the
security software if you cannot find
[SA-NS400] or the browser does not open
even if you double-click [SA-NS400] on
screen of your computer.
• Restart your computer if you cannot find
[SA-NS400].
5 Select the desired language
when the “Language Setup”
screen appears.
6 Select [Network Settings] from
the menu.
7 Enter the SSID of your access
point, then select the security
method.
Enter the SSID and Security Method.
Refer to the memo that you wrote for this
information (page 14).
Enter Security key (WEP/WPA key, etc.)
if you selected anything other than [No
Security] as a security method.
Note
You cannot input the following characters.
: / ? # [ ] @ ! $ & ' ( ) * + , ; = " %
8 Click [Apply].
9 Click [OK] when the
confirmation screen of the
pop-up window appears.
10Disconnect the unit and the
wireless LAN router/access
point following the on-screen
instructions.
The unit restarts automatically, then the
LINK indicator lights up in green when
the connection is made.
Tip
Refer to the operating instructions for details
on the access point.
Apply