Filter
Top Products
55
US
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01US-
STRDG1200CEL\050AMP.fm
masterpage: Right
STR-DG1200
3-289-135-11(1)
Amplifier Operations
•AMP
The HDMI audio signals from the playback
component is only output to the speakers
connected to the receiver. The multi channel
sound can be played back as it is.
Note
Audio signals are not output from the TV’s
speakers when “Audio Out” is set to “AMP”.
x Subwoofer Level (Subwoofer
level for HDMI)
Lets you set the level of the subwoofer to 0 dB
or +10 dB when PCM signals are input via an
HDMI connection. You can set the level for
each HDMI input independently.
•0 dB
• +10 dB
•AUTO
The subwoofer level is automatically set to
0 dB or +10 dB depending on the frequency.
Settings for the system
(System settings menu)
You can use the System settings menu to
customize the settings of the receiver. Select
“System” in the Settings menus. For details on
adjusting the parameters, see “7: Operating the
receiver using the GUI (Graphical User
Interface)” (page 36).
x Screen Saver (Screen Saver)
Lets you activate the screen saver function for
the GUI menu on the TV connected to the
receiver.
•ON
When there has been no operation attempted
for 15 minutes, the screen saver function is
activated automatically.
•OFF
The screen saver function is disabled.
x Language (Language)
Lets you select the language for the GUI menu
on the TV connected to the receiver.
• English
•Español
•Français
•Deutsch
System settings menu
parameters