Filter
Top Products
54
US
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01US-
STRDG1200CEL\050AMP.fm
masterpage: Left
STR-DG1200
3-289-135-11(1)
Settings for the video
(Video settings menu)
You can use the Video settings menu to make
settings for video. Select “Video” in the
Settings menu. For details on adjusting the
parameters, see “7: Operating the receiver
using the GUI (Graphical User Interface)”
(page 36).
x Resolution
(Converting video signals)
Lets you convert the resolution of analog video
input signals.
•DIRECT
•AUTO
• 480i/576i
• 480p/576p
• 720p
• 1080i
• 1080p
For details on operation, see “In the video
input/output conversion table classified by the
menu settings” (page 32).
Settings for HDMI (HDMI
settings menu)
You can use the HDMI settings menu to make
the required settings for components
connected to the HDMI jack. Select “HDMI”
in the Settings menu. For details on adjusting
the parameters, see “7: Operating the receiver
using the GUI (Graphical User Interface)”
(page 36).
x Control for HDMI (Control for
HDMI)
Lets you turn the components connected to the
HDMI jack using an HDMI cable on or off.
•OFF
•ON
Note
When you set “Control for HDMI” to “ON”,
“Audio Out” may be changed automatically.
x Audio Out
(HDMI audio input setting)
Lets you set the audio output for HDMI from
the playback component connected to the
receiver via an HDMI connection.
• TV+AMP
The sound is output from the TV’s speaker
and the speakers connected to the receiver.
Notes
• The sound quality of the playback component
depends on the TV’s sound quality, such as the
number of channels, the sampling frequency, etc.
When the TV has stereo speakers, the sound
output from the receiver is also stereo as that of
the TV, even if you play multi channel source.
• When you connect the receiver to a video
component (projector, etc.), sound may not be
output from the receiver. In this case, select
“AMP”.
• When you select the input that you have assigned
the HDMI input, sound does not output from the
TV.
Video settings menu parameters
HDMI settings menu parameters