Filter
Top Products
33-EN
Error message
NO SIGNAL
P/B ONLY
PROTECTED
SORRY
TEMP OVER
TR FULL
TrPROTECT
Meaning/Remedy
•The recorder could not detect digital input signals.
b
Make sure that the source is connected firmly (page 11).
•You tried to record or edit on a premastered MD (P/B means
playback.)
b
Insert a recordable MD.
•You tried to record or edit on a MD with the tab in the record-
protect position.
b
Slide the tab back (page 28).
•You tried to erase a track mark while playing the MD or at the
beginning of the first track.
•You tried to erase a track mark to combine tracks the recorder
cannot combine (caused by system limitation).
•Heat has built up in the recorder.
b
Let the recorder cool down.
•There is no more space for new data when you are editing the
MD.
b
Erase unnecessary tracks (page 21).
•You tried to record or edit on a track that is protected from
erasing.
b
Record or edit on other tracks.