Sony MZ-R701 MiniDisc Player User Manual


 
61-GB
TOC Edit
The MD player is recording information (track start and end
position) from the memory to the disc.
Wait until this process is completed. Do not expose the player to
physical shock, nor disrupt power supply.
BUSY
You tried to operate the recorder while it was accessing the
recorded data.
Wait until the message goes out (in rare cases, it may take 2 - 3
minutes).
NAME FULL
You tried to enter more than 200 letters to label a single track or
disc.
You tried to enter a total of more than 1700 letters for track or disc
names.
Enter the characters within the limit.
Hi DC in
Voltage of the power supply is too high (The supplied AC power
adaptor is not used).
Use the supplied AC power adaptor.
HOLD
The recorder is locked.
Move HOLD against the arrow to unlock the recorder (pages 10,
37).
LOW BATT
Battery is weak.
Charge the rechargeable battery or replace the dry battery
(page 9).
MEM OVER
You tried to record with the recorder placed where it receives
continuous vibration.
Put the recorder on a stable place, and start recording again.
NO COPY
You tried to make a copy from a disc that is protected by the Serial
Copy Management System. You cannot make copies from a
digitally connected source which was itself recorded using digital
connection.
Use analog connection instead (page 20).