Sony MZ-R701 MiniDisc Player User Manual


 
20-GB
Recording with analog input (line cable
required)
The sound will be sent from the connected equipment as analog
signal but will be recorded digitally on the disc.
1 Press and slide REC to the right.
REC indication lights up in the display and recording starts.
2 Play the source you want to record.
For recording operations, see Recording an MD right away!
(page 12). To record from a portable CD player, set the CD
player to pause and then start recording.
LINE IN (OPTICAL) jack is for both digital and analog input
The recorder automatically recognizes the type of line cable and switches to
digital or analog input.
Note
If you temporarily stop a recording operation by pressing X, a track mark will
be added at that point when you press X again to resume recording. The
recording continues from a new track.
to LINE IN
(OPTICAL)
Line cable
(not supplied)*
CD player,
cassette recorder,
etc.
to LINE OUT
L (white)
R (red)
Use the connecting cords without an attenuator. To connect to a
portable CD player having a stereo mini-jack, use a connecting cord
with a stereo-mini plug on both ends (not supplied).