Sony MZ-N510 CD Player User Manual


 
36
Dividing a track directly
1 While playing or pausing an MD,
press T MARK on the recorder at the
point you want to mark.
“MK ON” appears in the display, and
a track mark is added. The track
number will increase by one.
To add track marks while
recording (except while
synchro-recording)
Press T MARK on the recorder at the
point you want to add a track mark.
You can use Auto Time Mark to add track
marks automatically at specified intervals
(except while digital recording) (page 26).
Combining tracks
(combine)
When you record with analog (line) input,
unnecessary track marks may be recorded
where recording level is low. You can
erase a track mark to combine the tracks
before and after the track mark.
Notes
You cannot erase a track mark on a track that
has been checked-out from your computer.
To combine groups or tracks in a disc with
group settings, see page 43.
You cannot combine tracks recorded in
different recording mode.
The track numbers will change as follows:
1 While playing the track with the track
mark you want to erase, press X to
pause.
2 Find the track mark by pressing
..
For example, to erase the third track
mark, find the beginning of the third
track. “00:00” appears in the display.
“MK” appears in the display for a few
seconds.
3 Press T MARK to erase the mark.
“MK OFF” appears in the display.
The track mark is erased and the two
tracks are combined.
z
When you erase a track mark, the date, time,
and name assigned to the mark are also erased.
1 342
132
Erase a track mark
Track numbers decrease
T MARK
4-way control key (.)
X