Filter
Top Products
85
Difference between digital (optical) and analog (line) inputs
The input jack of this recorder works as both digital and analog input jacks. Connect the
recorder to a CD player or a cassette recorder using either digital (optical) input or analog
(line) input. To record, see “Recording a disc right away!” (page 21) to record using digital
(optical) input, and “Recording from a TV or radio (Analog Recording)” (page 34) to
record using analog (line) input.
Track marks may be copied incorrectly:
•when you record from some CD players or multi disc players using digital (optical) input.
•when the source is in shuffle or program play mode while recording using digital (optical) input. In
this case, play the source in normal play mode.
•when programs with audio that is digitally broadcast (e.g., digital TV) are recorded through the digital
(optical) input.
Difference Digital (optical) input Analog (line) input
Connectable
source
Equipment with a digital (optical) output jack
(CD player, DVD player, etc.)
Equipment with an analog (line)
output jack (Casette deck, radio,
record player, etc.)
Usable cord Optical cable (with an optical or an optical-
mini plug) (page 21)
Line cable (with 2 phono plugs
or a stereo-mini plug) (page 34)
Signal from
the source
Digital Analog
Even when a digital source
(such as a CD) is connected, the
signal sent to the recorder is
analog.
Track marks
1)
1)
You can erase unnecessary marks after recording. (“Combining tracks (Combine)”, page 54).
Marked (copied) automatically
• at the same positions as the source (when the
sound source is a CD or an MD).
• after more than 2 seconds of no sound
(page 81) or low-level segment (with a
sound source other than a CD or an MD).
• when the recorder is paused (3 seconds of no
sound is encountered while synchro-
recording)
Marked automatically
• after more than 2 seconds of
no sound (page 81) or low-
level segment.
• when the recorder is paused
while recording.
Recorded
sound level
Same as the source.
Can also be adjusted manually (Digital REC
level control) (“Adjusting the recording level
manually”, page 35).
Adjusted automatically. Can
also be adjusted manually
(“Adjusting the recording level
manually”, page 35).
Note