Sony MZ-M10 CD Player User Manual


 
78
DATA SAVE The recorder is writing information to the system file, such as the recorded
data or editing information.
, Wait until the message disappears from the display.
DC IN TOO
HIGH
Voltage of the power supply is too high (The supplied AC power adaptor is
not used).
, Use the supplied AC power adaptor.
DISC FULL Recording may not be done if the remaining recordable time on the disc is
48 seconds or less.
, Replace the disc.
DOWNLOAD
READY
MD Simple Burner is now ready to record an audio CD to the disc in the
recorder using Simple mode. (Refer to
“Software Operation” section.)
EJECT DISC OK The recorder has finished communicating with the computer and it is safe
to eject the disc from the recorder or disconnect the USB cable.
END The recorder reached to the end of the disc while playing or pressing >.
ERROR There is an internal malfunction in the system.
, Restart the operation by doing steps 1 to 3 on page 76.
ERROR XX There is an internal malfunction in the system.
, Restart the operation by doing steps 1 to 3 on page 76. If the message
appears again, please consult your nearest Sony dealer.
FOLDER NO
EXPAND
You tried to use the File List function to expand a folder that is already at
the 16th level.
, Files and folders can be expanded down to 16 levels. Expansion beyond
this level is not possible.
FORMAT
ERROR DISC
A disc with a format that the recorder does not support was inserted.
, Insert a disc used in Hi-MD mode.
A disc formatted on a computer was inserted.
, A disc formatted on a Windows or Macintosh computer cannot be used.
Format the disc on the recorder or with the SonicStage software.
GROUP FULL You tried to create a 256th group on a disc used in Hi-MD mode or 100th
group on a disc used in MD mode.
, You can create only up to 255 groups (on a disc used in Hi-MD mode)
or 99 groups (on a disc used in MD mode) on a disc. Keep the group
number within 255 or 99.
HOLD The recorder is locked.
, Slide HOLD against the arrow to unlock the recorder (page 18).
IN MENU You pressed a key on the remote control while selecting a menu on the
recorder.
LOW BATTERY • Batteries are weak.
, Charge the rechargeable battery or replace the dry battery (page 17).
MEMORY
OVER
You tried to record with the recorder placed where it receives continuous
vibration.
, Put the recorder on a stable place, and start recording again.
NO
BOOKMARKED
TRACK
You selected bookmark play without setting bookmarks.
, Set bookmarks (page 41).
Message Mean ing/Rem edy