Filter
Top Products
53
1 Play the disc you want to erase to
check the contents.
2 Press x.
3 Enter the menu to select “Edit” -
“Erase” - “All Tr Erase”.
“ALL TRACKS WILL BE
ERASED” appears in the display.
4 Turn the jog dial to select “OK”, and
then press the jog dial to erase the
whole disc.
“SYSTEM FILE WRITING” appears
in the display, and all the tracks will
be erased.
When erasing completes, “NO
TRACK” appears in the display in
Hi-MD mode and “BLANKDISC”
appears in MD mode.
Dividing a track (Divide)
You can divide a track with a track mark,
creating a new track from the part
following the track mark. The track
numbers will increase as follows.
You cannot divide a track if:
•the track has been transferred from a Windows
computer.
•the track has been recorded in Hi-MD mode
using the MD Simple Burner software.
•the dividing point is at the beginning or end of
the track.
•the division would cause the total number of
tracks on the disc to exceed the maximum
allowed (2,047 tracks for a disc used in Hi-
MD mode or 254 tracks for a disc used in MD
mode).
While playing or pausing, press T MARK
at the point you want to mark.
To erase the whole disc
Note
Dividing a track directly
1 3 42
231 4 5
Track marking
Track numbers increase.
T MARK