Sony MZ-R500DPC CD Player User Manual


 
28-GB
4 Press ENTER again.
The track moves to the selected
destination track.
Labeling recordings
You can name discs while the recorder is
stopped, tracks while the recorder is
playing, and both while the recorder is
recording. Each name can be as long as
200 letters.
Each disc can hold up to 1,700
alphanumeric letters during playback or
stop.
Available characters
Capital and small letters of the English
alphabet
Numbers 0 to 9
!
" # $ % & ( ) * . ; < = > ?
@ _ ` + ' , / : _ (space)
Labeling a disc during stop
1 Press ENTER, press
>MENU. repeatedly until
EDIT flashes in the display, and
then press ENTER again.
“” and Name flash in the
display.
2 Press ENTER.
The disc is ready to be labeled.
3 Press >MENU. repeatedly to
select a letter and press ENTER.
The selected letter stops flashing and
the cursor moves to the next input
position.
4 Repeat step 3 and enter all characters
of the label name.
To cancel labeling, press x.
5 Press ENTER for 2 seconds or more.
The track or disc is labeled.
>MENU./
./>
VOL +/
X
x
ENTER
END
SEARCH
Press To
X Switch between
capital letters, small
letters and marks /
numbers.
VOL +/ Move the cursor to
the left or right.
./> Change the letter to
the one before / next
one.
END SEARCH/
VOL +
Insert a blank space
to type in a new letter
pressing both buttons
together.
END SEARCH/
VOL
Delete a letter and
move back all
following letters to
the left pressing both
buttons together.
x Cancel labeling.