Filter
Top Products
Basic Operations
Basic Operations
7
Playing an MD
?1/u
§§
0)
≠ ±≠ ±
r
pP
·
0)
pP
·
PHONE LEVEL
PHONES
MIN MAX
MENU/
NO
YES
CLEAR
PUSH ENTER
REC
AMS
EJECT
OPEN/CLOSE
NORMAL
CD SYNCHRO
HIGH
CLEAR
TIME PLAY MODE DISPLAY INPUT PLAY MODE TIME/CHAR
PUSH ENTER
CD
AMS
REC-IT
STANDBY
MD
MD LP
REC MODE
2
3 4
1
Turn on the amplifier and set the source selector to the position
for this deck.
2
Press 1/u.
The STANDBY indicator turns off.
3
Insert an MD.
With the arrow pointing this way
4
Press ·.
The deck starts playing. Adjust the volume on the amplifier.
To Do the following:
Connect the headphones.
Adjust the headphone volume.
With the label side up
Press p.
Turn AMS counterclockwise (or press = on the
remote).
Take out the MD
When using the controls on the
deck
Use the MD deck controls located
to the right of the front panel.
When using the remote Z
Set SELECT to MD.
Audio output
Output switches automatically to
the audio of the MD.
z You can start playing with
the track selected in Step 4
1 Turn AMS (or press = or
+) to select the track you
want to play using the
display*.
2 Press AMS or ·.
* See “Using the Display” on
page 12 and 13.
z You can change the MD
playback speed
See “Changing the Pitch of the
MD” on page 18.
Stop playing
Pause playing Press P. Press the button again or press · to
resume playing.
Go to the next track Turn AMS clockwise (or press + on the
remote).
Go to the beginning of the
current track or the
preceding track
Press § EJECT after stopping playing.