Filter
Top Products
Editing Recorded MDs
36
3 Press an alphabet/number button to enter a
character.
If you selected uppercase or lowercase letters
1 Press the corresponding letter/number button
repeatedly until the character to be entered
flashes.
Or, press the button once and press =/+
repeatedly.
2 Press ).
The flashing character is entered and lights
continuously and the cursor shifts to the right.
4 Repeat Steps 2 and 3 until you have entered the
entire title.
If you entered the wrong character
Press 0 or ) until the character to be corrected
starts flashing.
Press CLEAR to erase the incorrect character, then
enter the correct one.
5 Press YES.
To cancel labeling
Press MENU/NO or p.
Changing an existing title Z
1
Press NAME EDIT/SELECT, then do the
following:
To change Make sure that the deck is
A track title Playing, pausing or recording the
track whose title is to be changed,
or stopped after locating the track
whose title is to be changed
A disc name Stopped with no track number
appearing in the display
2 Press down CLEAR until the current title is
erased.
3 Enter the new title.
Do Steps 6 to 9 of “Labeling Recordings” on page
33, or Steps 2 to 4 of “Labeling tracks and MDs
with the remote” on page 35.
4 Press YES.
Erasing a title on a disc (Name Erase
Function)
Use this function to erase a title on a disc.
1 While the deck is stopped, playing, recording, or
pausing, press MENU/NO to display “Edit
Menu.”
2 Turn AMS to select “Name ?,” then press AMS or
YES.
3 Turn AMS to select “Nm Erase ?,” then press
AMS or YES.
4 Turn AMS to select “Disc” to erase the disc title,
or the track whose title you want to erase and
press AMS or YES.
“Complete!” appears for a few seconds and the
title is erased.
To cancel the Name Erase Function
Press MENU/NO or p.