Filter
Top Products
7
1 Press TUNER/BAND repeatedly
until the band you want appears in
the display.
Every time you press this button, the
band changes as follows:
FM ˜ AM
2
Press and hold – or + until the
frequency indication starts to change
automatically, then release it.
Scanning stops when the system tunes in
a station. “TUNED” and “STEREO” (for
a stereo program) appear.
Step 3: Presetting
radio stations
3 Press TUNER MEMORY.
A preset number flashes in the display.
4 Press ENTER/NEXT.
The station is stored.
5 Repeat steps 1 to 4 to store other
stations.
To tune in a station with a weak
signal
When the desired station is skipped during
automatic tuning, press – or + repeatedly in
step 2 to tune in the station manually.
To set another station to the exist
preset number
Start over from step 1. After step 3, press =
or + repeatedly to select the preset number
you want to store the station.
Preset number
1/u
(power)
continued
MONO
TUNED
STEREO
MHz
kHz
VOLUME
ALL DISCS
ß
1
2
4
2
3
=/+
VOLUME
ALL DISCS
ß
You can preset up to 30 stations, 20 for FM
and 10 for AM.