Filter
Top Products
29
To check the setting
Press TIMER SELECT and press = or +
to select “TUNER REC”, then press
ENTER/NEXT.
To change the setting, start over from step 1.
To cancel the timer operation
Press TIMER SELECT and press = or +
to select “TIMER OFF”, then press
ENTER/NEXT.
Notes
•If the system is on at the preset time, the recording
will not be made.
•You cannot set the timer if the timer on and off
times are the same.
• When you set the Sleep Timer, the Timer-
recording will not turn on the system until the
Sleep Timer turns it off.
•You cannot activate the Timer-recording and
Daily Timer at the same time.
4 Press ENTER/NEXT.
“ON” appears and the hour digits flash
in the display.
5 Set the time to start recording.
Press = or + repeatedly to set the
hour, then press ENTER/NEXT.
The minute indication starts flashing.
Press = or + repeatedly to set the
minute, then press ENTER/NEXT.
“OFF” appears and the hour indication
flashes again.
6 Set the time to stop recording
following the above procedure.
The type of timer (“REC”) appears,
followed by the start time, the stop time
and the preset station number, then the
original display appears.
7 Press § and insert a blank tape into
deck B.
8 Turn off the system.
When the recording starts, the volume
level is set to the minimum.
12RECSLEEP
VOLUME
ALL DISCS
ß
12RECSLEEP
VOLUME
ALL DISCS
ß