Filter
Top Products
Basic Operations
11
1 Press 6 OPEN/CLOSE and place
up to two CDs on the disc tray.
If a disc is not placed properly, it will not
be recognized.
To insert a third disc, press DISC SKIP/
EX-CHANGE to rotate the disc tray.
2 Press one of the DISC 1 – 3 buttons.
The disc tray closes and play starts.
If you press CD (P (or CD ( on the
remote) when the disc tray is closed,
play starts from the CD loaded on the
disc tray whose number is displayed.
With the label
side up. When
you play a single
CD, place it on
the inner circle
of the tray.
Disc tray number
Playing time
Track number
To
Stop play
Pause
Go to the next
track or go
back to the
start of the
current track
Find a point in
a track
Select a CD
in stop mode
Play only the
CD you have
selected
Play all CDs
Remove the CD
Exchange other
CDs while
playing
Adjust the
volume
Tips
•Pressing CD (P when the system is off
automatically turns the system on and starts CD
playback if there is a CD in the tray (One Touch
Play).
•You can switch from another source to the CD
player and start playing a CD just by pressing
CD (P or DISC 1 – 3 (Automatic Source
Selection).
•If there is no CD in the player, “CD NO DISC”
appears in the display.
Do this
Press p.
Press CD (P (or P on the
remote). Press again to resume
play.
During play or pause, press
+ (to go forward) or = (to
go back).
Press and hold down ) or
0 during play and release it
at the desired point.
Press DISC 1 – 3 or
DISC SKIP/EX-CHANGE.
Press PLAY MODE repeatedly
until “1 DISC” appears.
Press PLAY MODE repeatedly
until “ALL DISCS” appears.
Press 6 OPEN/CLOSE.
Press DISC SKIP/
EX-CHANGE.
Turn VOLUME (or press
VOL +/– on the remote).
SHUFFLE REPEAT1
ALL 1DISCS PROGRAM
STEP
VOLUME
SYNC
ß