Filter
Top Products
35
GB
Other Operations
Using the Radio Data
System (RDS)
(European model only)
What is the Radio Data System?
Radio Data System (RDS) is a
broadcasting service that allows radio
stations to send additional information
along with the regular program signal.
This tuner offers convenient RDS features
such as station name. RDS is available
only on FM stations.*
Note
RDS may not work properly if the station you
are tuned in is not transmitting the RDS signal
properly or if the signal is weak.
* Not all FM stations provide RDS service, nor
do they provide the same type of services. If
you are not familiar with the RDS system,
check with your local radio stations for details
on RDS services in your area.
Receiving RDS broadcasts
Simply select a station from the FM
band.
When you tune in a station that provides
RDS services, the station name appears in
the display.
To check the RDS information
While receiving an RDS station,
press DISPLAY repeatedly.
RDS information appears on the display.
Creating your own
sound effect
You can raise or lower the levels of
specific frequency ranges and then store
up to the user equalizer in the memory.
1 Press EQ BAND repeatedly to
select a frequency band and
then turn OPERATION DIAL to
adjust the equalizer level.
Repeat this for each band you
want to adjust.
2 Press ENTER (RM-AMU053) or
(RM-AMU054).
“USER EQ” appears and the setting is
stored in the memory.
To call up the user equalizer setting
Press PRESET EQ (or EQ on the remote)
repeatedly until “USER EQ” appears.
To cancel the sound effect
Press PRESET EQ (or EQ on the remote)
repeatedly until “FLAT” appears.
GROOVE
GROOVE
AUTO
AUTO
TUNED
TUNED
MHz
MHz
1
ST
ST
2 3
REC
Frequency band
Equalizer level