32
US
Press TIMER SELECT and
press . or > repeatedly
to select “TIMER OFF”, then
press ENTER.
Tip
The system turns on 15 seconds before the preset
time.
Notes
• When you use the Sleep Timer, the Daily Timer
will not turn on the system until the Sleep Timer
turns it off.
• You cannot activate the Daily Timer and the Timer-
recording at the same time.
Start over from step 1.
Cancel the timer
Press TIMER SELECT and
press . or > repeatedly
to select “DAILY”, then press
ENTER .
Change the setting
7 Press . or > repeatedly until the
music source you want appears.
The indication changes as follows:
t
TUNER
y
CD PLAY
T
t
TAPE PLAY
T
8 Press ENTER.
The type of timer, followed by the start
time, stop time, and the music source,
appear, then the original display appears.
9 Press ?/1 to turn off the system.
Other Operations
To Do this
Check the setting
Waking up to music
— Daily Timer
You can wake up to music at a preset time.
Make sure you have set the clock (see “Setting
the clock” on page 12).
1 Prepare the music source you want to
play.
• CD: Load a CD. To start from a
specific track, make a program (see
“Programing CD tracks” on page 15).
• Tape: Load a tape with the side you
want to play facing forward.
• Radio: Tune in the preset station you
want (see “Listening to the radio” on
page 22).
2 Adjust the volume.
3 Press TIMER SET.
4 Press . or > repeatedly to select
“DAILY SET”, then press ENTER.
“ON” appears and the hour indication
flashes.
5 Set the time to start playing.
Press . or > repeatedly to set the
hour, then press ENTER.
The minute indication flashes.
Press . or > repeatedly to set the
minute, then press ENTER.
6 Set the time to stop playing following
the procedure in step 5.