Filter
Top Products
28
n
n
n
BEAT
SELECT
BEAT
SPEED
BEAT
JAM
AUTO
BPM
BEAT
ON/OFF
BEAT
LEVEL
Using the beat
functions
With the beat functions, you can enjoy a
variety of rhythms. They can be used with
any source, to create original recordings.
/ Press BEAT ON/OFF during
playback at the point you want to
start the beat.
The button’s indicator lights up.
To change the speed
Turn the jog dial while holding BEAT SPEED
(or press SPEED ? or / on the remote) to
select the speed you desire (BPM 40~200).
To change the beat pattern
Turn the jog dial while holding BEAT
SELECT (or press SELECT > or . on the
remote) to select the pattern you desire. The
name of the beat pattern appears in the
display.
8 BEAT 1
8 BEAT 2
MIXED BEAT*
* When you purchased this unit, a simple beat had
been stored at this setting.Your original beat is
stored in this when you create the original beat
using the BEAT MIX function (see “Using the
BEAT MIX function” on page 30).
To cancel the beat
Press BEAT ON/OFF. Make sure the button’s
indicator turns off.
To change the beat volume
Press BEAT LEVEL repeatedly to select the
level you desire. Each time you press the
button the level changes as follows:
LEVEL 1
µ
LEVEL 2
µ
LEVEL 3
µ
LEVEL MAX
Tips
•You can use the drum pads and the beat function
together.
•Press BEAT JAM while holding BEAT SPEED to
hear all drum sounds and beat patterns played
repeatedly when the power is on. Press any key
(except BEAT LEVEL) to stop.
Jog dial
(Power)
BEAT ON/OFF
√
◊
√
◊
SPEED ?//
SELECT >/.
˜˜
•••
˜