Filter
Top Products
24
p
Recording a CD by
specifying track order
— Program Edit
1 Place a CD and insert a blank tape
into deck B.
2 Press FUNCTION repeatedly until
“CD” appears in the display.
3 Press PLAY MODE repeatedly until
“PROGRAM” appears in the
display.
4 Press one of the DISC 1~3 buttons to
select a CD.
5 Turn the jog dial until the desired
track appears in the display.
6 Press ENTER/NEXT.
The track is programmed. The program
step number appears, followed by the
total playing time.
7 To program additional tracks to be
recorded on side A, repeat steps 4 to
6.
Skip step 4 to select tracks from the same
disc.
8 Press P on the remote to insert a
pause at the end of side A.
“P” appears in the display and the total
playing time resets to “0.00” in the
display.
11, EDIT
1
2
4
5
6
8
10
You can record tracks from all the CDs in the
order you want. When programming, make
sure the playing times for each side do not
exceed the length of one side of the tape.
3
12
Disc number
Track number
Total playing time
(including selected track)
(Power)
√
◊
√
◊
CHECK
1