Filter
Top Products
8
TUNED
STEREO
4 Press ENTER.
The station is stored.
5 Repeat steps 1 through 4 to store
other stations.
To tune in a station with a weak
signal
Press + or – (or TUNING +/– on the remote)
repeatedly in step 2 to tune in the station
manually.
To set another station to an
existing preset number
Start over from step 1. After step 3, turn the
shuttle until it clicks to select the preset
number where you want to store the other
station.
You can preset a new station in the selected
preset number.
TUNED
STEREO
MHz
Preset number
Step 3: Presetting radio stations
(continued)
1 Press TUNER/BAND repeatedly to
select FM or AM.
2 Press and hold + or – (or TUNING
+/– on the remote) until the
frequency indication starts to
change, then release.
Scanning stops automatically when a
station is tuned in. “TUNED” and
“STEREO” (for a stereo program)
appear.
3 Press TUNER MEMORY.
A preset number appears in the display.
The stations are stored from preset
number 1.