Sony MHC-BX3/DX3 Stereo System User Manual


 
22
To Press
Check the CHECK on the remote
program repeatedly. After the last
track, “CHECK END”
appears.
Clear a track from CLEAR on the remote in
the end stop mode.
Clear a specific CHECK on the remote
track repeatedly until the
number of the track to be
erased appears, then press
CLEAR.
Add a track to the 1 Select the disc tray with a
program in stop DISC 1~3 button.
mode 2 Select the track by
pressing ./>.
3 Press ENTER.
Clear the entire x once in stop mode or
program twice during playback.
Tips
•The program you made remains in the system’s
memory even after it has been played back. Press
CD, then press hH to play the same program
again.
• If “--.--” appears instead of the total playing time
during programming, this means:
– you have programmed a track number
which exceeds 20.
– the total playing time has exceeded 100 minutes.
To cancel Program Play
Press PLAY MODE repeatedly until “PGM”
or “SHUFFLE” disappears from the display.
Programming the CD tracks
(continued)