Filter
Top Products
Getting Started
19
GB
Notes
• The clock settings are canceled when you disconnect
the power cord or if a power failure occurs.
• You cannot set the clock in Power Saving Mode
(page 76).
Before using the system, you can make the
minimum basic adjustments (LANGUAGE
SETUP, SCREEN SETUP, SPEAKER
SETUP*) in QUICK SETUP. After performing
QUICK SETUP, the system is ready for
playback. To perform further speakers settings,
see “Setting the speakers” on page 53.
* Except for MHC-GNZ77D/MHC-GNZ55D.
Note
When there is a disc in the unit or the disc tray is
opened, the guide message does not appear on the
TV screen. To perform QUICK SETUP, press Z
OPEN/CLOSE on the unit to remove the disc and press
again to close the disc tray.
1 Turn on your TV and select the video
input.
2 Press ?/1 to turn on the system.
Note
Make sure that the headphone or microphone is
not connected. Otherwise, you cannot perform
SPEAKER SETUP.
3 Press FUNCTION +/– repeatedly to
select “DVD” (or press DVD on the
unit).
The guide message appears at the bottom of
the TV screen.
4 Press ENTER.
The “LANGUAGE SETUP” display
appears on the TV screen.
5 Press V or v repeatedly to select a
language, then press ENTER.
Tips
• The selected language is for “OSD”, “MENU”
and “SUBTITLE ”.
• The selectable language is different depending
on the area.
The setting is selected and the “SCREEN
SETUP” display appears on the TV screen.
6 Press V