Filter
Top Products
20
Listening to the radio
(continued)
n
Preset number
Frequency
n
1 Press TUNER/BAND repeatedly
until the band you want appears in
the display.
The bands you can receive vary
depending on the model you purchased.
Be sure to check which bands you can
receive.
Every time you press the button, the
band changes as follows:
2 band model:
FM ˜ AM
3 band model:
FM n MW n SW
or
FM n MW n LW
2 Turn the jog dial to tune in the
desired preset station.
For MHC-F250AV
You can also use TUNING + or – on the
remote to tune in preset stations.
For MHC-FR10 and MHC-F150
You can also use = or + on the
remote to tune in preset stations.
Turn counter-
clockwise for
lower preset
numbers.
Turn clockwise
for higher
preset
numbers.
To Do this
Turn off the radio Press .
Adjust the volume Turn VOLUME (or press
VOLUME (VOL) +/–
on the remote).
To listen to non-preset radio
stations (from front panel only)
Use manual or automatic tuning in step 2.
For manual tuning, press + ()/+) or –
(=/0) repeatedly. For automatic tuning,
press and hold + ()/+) or – (=/0).
Tips
•Pressing TUNER/BAND when the power is off
automatically turns the power on and tunes to the
last received station (One Touch Play).
•You can switch from another source to the radio
just by pressing TUNER/BAND (Automatic
Source Selection).
•When an FM program is noisy, press
STEREO/MONO so that “MONO” appears in the
display. There will be no stereo effect, but the
reception will improve. Press the button again to
restore the stereo effect.
•To improve broadcast reception, reorient the
supplied antennas.
ALL
1
DISC
S
PROGRAM
SHUFFLE
REPEAT
1
TEXT
DELETE
FILE
DISCGROUP SYNC TRACK ART MONO STEP
STEREO
GROUP
FILE
PLUS ONE
DOLBY NR RELAY
NEXT
CD TEXT
HI-LIGHT
DBFB
TUNED
MANUAL
AUTO
PRESET
SUR
1
kHz
MHz
1
2
REC
SLEEP
VOLUME
2 3 4 5