Filter
Top Products
46
01GB02CD-EUR.fm
MEX-5DI
3-242-048-31 (1)
masterpage:Left
To deactivate auxiliary equipment in
the music source display
1 Press (OFF).
CD/MS/MD playback or radio reception
stops (the key illumination and display
remain on).
2 Press (MENU).
3 Press < or , repeatedly to select
“Setup.”
4 Press (ENTER).
5 Press M or m repeatedly to select
“AUX Skip.”
6 Press (ENTER).
7 Press m to select “ON.”
8 Press (MENU).
To restore the indication, select “AUX Skip
OFF.”
Setting the security code
This unit has a security function to discourage
theft. Input a four-digit number as your security
code.
If you set it, you need to input the stored code to
turn on the unit should you re-install the unit in
another car or after changing the battery.
1 Press (MENU).
2 Press < or , repeatedly to select
“Setup.”
3 Press (ENTER).
4 Press M or m repeatedly to select
“Security.”
5 Press (ENTER).
Code Set display is displayed.
1Press M or m repeatedly to enter the
first digit (0-9).
2Press , to move the cursor to the
2nd digit, then press M or m
repeatedly to enter the 2nd digit.
Each time you press M, a digit goes
up and each time you press m, a
digit falls.
3Repeat step 2 to enter the 3rd digit
and the 4th digit.
6 Press (ENTER).
Check Code display appears.
7 Press M or m repeatedly to select
“YES.”
8 Press (ENTER).
The display returns to the normal display.
Notes
• The security code cannot be entered by the number
buttons (1-6).
• Make sure not to forget your security code.
• If you select “NO” in step 7 and press (ENTER), the
display returns to the Code Set display in step 5.