Filter
Top Products
35
EN
Editing Recorded MDs
4 Repeat Step 2 and 3 until you have entered the
entire title.
If you entered the wrong character
Press 0 or ) until the character to be corrected
starts flashing.
Press CLEAR or EDIT/NO to erase the incorrect
character, then enter the correct one.
5 Press NAME again.
This completes the labeling procedure and the title
appears in the display.
To cancel labeling
Press EDIT/NO or p.
Changing an existing title Z
1 Press NAME, then do the following:
To change Make sure that the deck is
A track title Playing, pausing the track whose
title is to be changed, or stopped
after locating the track whose title
is to be changed
A disc name Stopped with no track number
appearing in the display
2 Press CLEAR or EDIT/NO until the current title
is erased.
3 Enter the new title.
Do Steps 6 to 9 of “Labeling Recordings” on page
32, or Steps 2 to 4 of “Labeling tracks and MDs
with the remote” on page 34 and this page.
4 Press NAME.
Erasing a title on a disc (Name Erase)
Use this function to erase a title on a disc.
1 While the deck is stopped, playing, or pausing,
press EDIT/NO to display “Edit Menu”.
2 Turn AMS until “Name ?” appears in the display
and press AMS or YES.
Skip this step while recording.
3 Turn AMS until “Nm Erase ?” appears in the
display and press AMS or YES.
4 Turn AMS to select “Disc” to erase the disc title,
or the track whose title you want to erase and
press AMS or YES.
“Complete!!” appears for a few seconds and the
title is erased.
To cancel Name Erase Function
Press EDIT/NO or p.
Erasing all titles on a disc (Name All Erase)
Use this function to erase all titles on an MD
simultaneously.
1 While the deck is stopped, playing, or pausing,
press EDIT/NO to display “Edit Menu”.
2 Turn AMS until “Name ?” appears in the display
and press AMS or YES.
3 Turn AMS until “Nm All Ers?” appears in the
display and press AMS or YES.
“Nm All Ers??” appears in the display.
4 Press AMS or YES.
“Complete!!” appears for a few seconds and all
titles are erased.
To cancel the Name All Erase Function
Press EDIT/NO or p.
z You can undo the Name All Erase Function
See “Undoing the Last Edit” on page 36.
z You can erase all recorded tracks and titles
See “Erasing all tracks on an MD” on page 28.