Filter
Top Products
Basic Operations
10
EN
Playing an MD
1
Turn on the amplifier and set the source selector to the position
for MD deck.
2
Press .
The STANDBY indicator turns off.
3
Insert an MD.
4
Press fl (or ·).
The deck starts playing. Adjust the volume on the amplifier.
To Do the following:
Stop playing Press p.
Pause playing Press
fl (or P). Press the button again to resume
playing.
Go to the next track Turn AMS clockwise (or press + on the
remote).
Go to the current track Turn AMS counterclockwise (or press = on the
or the preceding track remote).
Take out the MD Press § after stopping playing.
z You can locate and play back
a track in Step 4
1 Turn AMS (or press = or
+) until the number of the
track you want to play
appears.
2 Press AMS or fl (or ·).
With the label side up
With the arrow pointing this way
)
0
§
=+
fl
pr
PHONE LEVEL
PHONES
MIN MAX
TIMER
PLAY MODE
CONTROL A1
OFFREC PLAY
STANDBY
REC MODE
EDIT/NO YES
AMS
REC LEVEL
STEREO
MONO
INPUT
010
PUSH ENTER
324
DISPLAY/
CHAR
DIGITALANALOG
Adjust the
headphone
volume.
Connect the
headphones.
When “REMOTE” appears in the
display
The deck is set to be operated from
the connected personal computer.
You cannot operate the deck from
the buttons on the front panel or
remote.
To use the buttons on the front panel
or remote, quit the MD editor
application, turn off the deck, then
turn it back on.