Filter
Top Products
Additional Information
24
US
Symptom Cause and remedy
Distorted or
intermittent sound
(sometimes with
noise)
Low sound
Loud background
noise
The sound cuts off
,Charge the rechargeable battery if it is weak, or replace alkaline batteries with
new ones. If the POWER indicator is still off after charging the battery, take
the headphones to a Sony dealer.
,Check if there is any wireless apparatus using 2.4 GHz frequency, or a
microwave oven in the vicinity.
,Change the position of the transmitter.
,When analog input is selected, change the ATT switch on the transmitter to
"–8 dB."
,If you connect the transmitter to an AV component using the headphone jack,
lower the volume level on the connected AV component.
,When analog input is selected, change the ATT switch on the transmitter to "0
dB."
,If you connect the transmitter to an AV component using the headphone jack,
raise the volume level on the connected AV component.
,Raise the headphone volume.
,Check if there is any wireless apparatus using 2.4 GHz frequency, or a
microwave oven in the vicinity.
,If you connect the transmitter to an AV component using the headphone jacks,
raise the volume level on the connected AV component.
,Charge the rechargeable battery if it is weak, or replace alkaline batteries with
new ones. If the POWER indicator is still off after charging the battery, take
the headphones to a Sony dealer.
,The transmitter stops transmitting signals if 5 minutes passes and no signal
has been input.
• Set the ATT switch on the transmitter to “0 dB.”
• If you connect the transmitter to an AV component using the headphone
jack, raise the volume level on the connected AV component.