Operation
21
US
Using Additional Headphones
In this system, by using additional MDR-RF5000 wireless headphones (sold
separately), more than one person can enjoy the surround sound experience
wirelessly at the same time.
Charge additional headphones with the transmitter of this system.
* There is no limit to the number of headphones that can be used within the RF signal
transmission area.
Notes
• The transmitter turns off automatically while charging. Remove these headphones from the
transmitter when using other headphones.
• This unit is not compatible with other wireless headphones since this unit employs a
proprietary 2.4 GHz wireless digital transmission system.
When using additional headphones
Each transmitter has its own ID number. When using additional MDR-RF5000
wireless headphones (sold separately), be sure to set the transmitter’s ID to that of the
headphones, otherwise the headphones will not work.
1 Remove the headphones from the transmitter.
The transmitter turns on automatically.
2 Put on the headphones.
The headphones automatically turn on.
Note
Charge the battery of additional headphones before setting their IDs, or use commercially
available (size AA) alkaline batteries.
3 Press and hold TUNE/ID SET on the transmitter and that on the headphones
at the same time for more than 3 seconds.
A repeated beep sound is heard from the
headphones and ID setting starts. When
the sound changes to a continuous beep
sound, the ID number is set for the
headphones.
Transmitter
MDR-RF5000
(sold separately)