Filter
Top Products
6
GB
Getting Started
z If your TV or VCR has an S video input connector
Connect the component via the S VIDEO OUT
connector using the S video cable (not supplied). You
will get a better picture.
S VIDEO IN
ç
S VIDEO
OUT
Important
Setting the color system switch
This player conforms to the NTSC and PAL color
systems. Set the COLOR SYSTEM switch on the rear
of the player to the appropriate position, according
to your TV.
• If the color system of your TV is NTSC:
Set the COLOR SYSTEM switch to NTSC. Pictures
will not be displayed if you set the switch to PAL.
When you play a VIDEO CD based on PAL
system, the picture will be stretched vertically and
will be displayed with the lower part of the
picture cut off.
• If the color system of your TV is PAL:
Set the COLOR SYSTEM switch to PAL. Pictures
will not be displayed if you set the switch to
NTSC. When you play a VIDEO CD based on
NTSC system, the picture will be stretched
horizontally and will be displayed with the upper
and lower parts of the screen masked in black.
• If your TV automatically changes the color system
according to the input signal:
Of course, pictures will be displayed with the
switch set to either NTSC or PAL.
But if you set the COLOR SYSTEM switch to
AUTO, the player automatically changes the color
system of video output according to the VIDEO
CD to be played. In this case, the color system
selected remains until you turn off the player, or
you play another VIDEO CD with a different color
system. If you turn off the player, the color system
will be set to PAL automatically when you turn on
the player again.
Be sure to turn off and on the player when you
change the setting.
COLOR
SYSTEM
AUTO
NTSC PAL
VIDEO CD player
S video cable
YC-15V (not supplied)
TV