Filter
Top Products
20
US
To cancel the X-ROUND effect
Press X-ROUND ON/OFF repeatedly until
“X-ROUND OFF” appears in the display. The
X-ROUND indicator turns off.
Notes
• If you cannot get the sound effect you want, check
the speaker connections.
• When the headphones are connected to the PHONES
jack, X-ROUND mode is automatically changed to
“X-ROUND OFF” and you cannot change this
setting.
Flashing sound effect
— FLASH
With the flash function, you can flash the sound
output. The sound cuts off periodically.
Hold down FLASH during
playback
The flashing effect is activated.
To cancel the flashing effect
Release FLASH.
To change the flash speed
Hold down FLASH and turn the JOG clockwise
or counterclockwise to change the flash speed
(1 ~ 20).
Tips
• You can activate the X-ROUND and FLASH effect
simultaneously.
• The power illuminator will synchronize with the
selected FLASH effect.
You can place your front speakers in one room
and your surround speakers in another room.
Then, use the Multi Room function to select the
speakers you want to turn on.
1 Press X-ROUND ON/OFF repeatedly
until “X-ROUND OFF” appears in the
display.
The X-ROUND indicator turns off.
2 Press SPEAKERS.
Each time you press the button, the
corresponding speaker indicators light up
and the display changes cyclically as
follow:
SPEAKERS A t SPEAKERS B t
SPEAKERS A+B
Notes
• When X-ROUND mode is selected, the Multi Room
setting automatically changes to SPEAKERS A+B.
• When the headphones are connected to the PHONES
jack, the Multi Room setting is automatically
changed to “SPEAKERS A+B” and you cannot
change this setting.
Listening to the sound in
another room
— Multi Room
To select Display
The front
speakers
SPEAKERS A
The surround
speakers
SPEAKERS B
Both the front
and surround
speakers
SPEAKERS A+B