Sony LBT-ZX66i Speaker System User Manual


 
39
US
Additional Information
Specifications
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
LBT-ZX99i USA model only
With 6-ohm loads, both channels driven,
from 120 Hz – 10 kHz; rates 200 watts per
channel minimum RMS power, with no
more than 0.7% total harmonic distortion
from 250 miliwatts to rated output.
LBT-ZX66i USA model only
With 6-ohm loads, per channel driven, from
120 Hz – 10 kHz; rates 220 watts per channel
minimum RMS power, with no more than
0.7% total harmonic distortion from 250
miliwatts to rated output.
Amplifier section
LBT-ZX99i (HCD-ZX99i)
The following are measured at
AC 120 V, 60 Hz
Front/Surround speaker
Power output (rated):
270 W + 270 W (at 6 , 1 kHz,
10% THD)
RMS output power (reference):
180 W × 2 + 180 W × 2 (6 at 1 kHz,
10% THD)
LBT-ZX66i (HCD-ZX66i)
The following are measured at
AC 120 V, 60 Hz
Front speaker
Power output (rated):
280 W (at 6 , 1 kHz, 10% THD)
RMS output power (reference):
210 W × 2 (6 at 1 kHz, 10% THD)
Inputs
PHONO IN L/R:
Sensitivity 3 mV, impedance
47 kilohms
MIC 1/MIC 2:
Sensitivity 1 mV, impedance
10 kilohms
GAME INPUT AUDIO L/R:
Sensitivity 250 mV, impedance
47 kilohms
GAME INPUT VIDEO:
1 Vp-p, 75
PC IN L/R:
Sensitivity 250 mV, impedance
47 kilohms
Outputs
PHONES:
accepts headphones of 8 or more
VIDEO OUT:
max. output level 1 Vp-p, load
impedance 75 ohms
Disc player section
System
Compact disc and digital audio system
Laser
Semiconductor laser
(λ = 780 nm)
Emission duration: continuous
Laser Output
Max. 44.6 µW*
* This output is the value measured at
a distance of 200 mm from the
objective lens surface on the Optical
Pick-up Block with 7 mm aperture.
Frequency response
2 Hz – 20 kHz (±1.0 dB)
Wave length
780 – 790 nm
Signal-to-noise ratio
More than 90 dB
Dynamic range
More than 90 dB
CD DIGITAL OUT OPTICAL:
Wave length 660 nm, output level
–18 dBm
Continued
l