Filter
Top Products
33
US
Other Operations
4 Set the time to start playback.
Press
V or v repeatedly to set the hour,
then press ENTER (or on the
remote).
The minute indication flashes in the
display. Use the procedure above to set
the minute. “OFF” appears and the
hour indication flashes in the display.
5 Set the time to stop playback using
the same procedure as step 4.
6 Select the sound source.
Press
V or v repeatedly until the
music source you want appears in the
display, then press ENTER (or on
the remote). The display will show the
timer settings.
7 Press ?/1 to turn off the system.
The system turns on a few seconds
before the preset time. If the system is
on at the preset time, the Play Timer
will not play.
Other operations
Notes
• If you use the Play Timer and the Sleep Timer
at the same time, the Sleep Timer has priority.
• The Play Timer will not be activated if the
system is turned on or if “STANDBY”
flashes in the display.
• The Play Timer setting remains as long as the
setting is not canceled manually.
• Be sure that the iPod is not playing when
using the Play Timer.
• The system turns on 30 seconds before the
preset time.
• The Play Timer may not be activated
depending on the status of the connected iPod
or iPod touch.
To Do this
Check the setting 1Press TIMER MENU.
“TIMER SELECT?”
flashes in the display.
2 Press ENTER (or
on the remote).
3 Press V or v
repeatedly to select
“PLAY SELECT?”,
then press ENTER.
Change the
setting
Start from step 1.
Cancel the Play
Timer
1 Press TIMER MENU.
“TIMER SELECT?”
flashes in the display.
2 Press ENTER (or
on the remote).
3 Press V or v
repeatedly to select
“TIMER OFF?”, then
press ENTER.