Filter
Top Products
6
2 Connect the FM/AM antennas.
Set up the AM loop antenna, then
connect it.
Step 2: Hooking up the system
(continued)
3 If your system has a VOLTAGE
SELECTOR on the rear panel, set it
to the position of your local power
line voltage.
4 Connect the power cord to a wall
outlet.
The demonstration appears in the
display. When you press ?/1, the
system turns on and the demonstration
automatically stops.
If the supplied adapter on the plug does
not fit your wall outlet, detach it from
the plug (only for models equipped with
an adapter).
To connect optional AV
components
See page 41.
To deactivate the demonstration
When you set the time (see “Step 3 Setting the
time”), the demonstration is deactivated.
To activate/deactivate the demonstration
again, press DISPLAY (for LBT-LX50/LX30/
LX7/LX5) or DEMO (STAND BY)(for other
models) while the system is off.
VOLTAGE SELECTOR
220V
120V
230
240V
-
AM
C
O
AX
IAL
FM
75
Jack type B
AM loop antenna
Extend the FM wire
antenna horizontally.
FM
75
AM
AM loop antenna
Extend the FM wire
antenna horizontally.
Jack type A