Filter
Top Products
16
Tips
• When you want to record on the reverse side,
press h after pressing z REC in step 5 so that
the indicator on the h button (for the reverse
side) lights up green .
• When you record on both sides, be sure to start
from the front side. If you start from the reverse
side, recording stops at the end of the reverse side.
• To record non-preset stations, select “MANUAL”
in step 2, then press TUNING +/– to tune in the
desired station.
• When you want to reduce the hiss noise in low-
level, high-frequency signals, press DOLBY NR
before step 7 so that “DOLBY NR B” appears in
the display.
• To record with the surround effect, press
SURROUND so that “SUR
” appears in the
display.
The equalizer settings will not be recorded.
• To improve broadcast reception, move the
supplied antennas.
Playing a tape
You can play any type of tape, TYPE I
(normal), TYPE II (CrO2), or TYPE IV (metal).
The deck automatically detects the tape type.
You can also use the AMS* functions to
quickly locate the desired songs.
To select either deck A or B, press DECK A
N or DECK B N on the remote.
* AMS: Automatic Music Sensor
Recording from the radio
(continued)
1
2
3
x
x
VOLUME
DOLBY
NR
m/
M
?/1
(Power)
3
Xm/
M
X
DECK A N
DECK B N
VOL +/–
AMS ./>
x
m/M