Filter
Top Products
40
4 Set the time to start recording.
Press TUNING +/– to set the hour, then
press ENTER/NEXT.
The minutes indication flashes.
Press TUNING +/– to set the minutes,
then press ENTER/NEXT.
The hour indication flashes again.
5 Set the time to stop recording
following the above procedure.
The start time, the stop time, the
recording source, and the preset station
appear in turn before the original display
returns.
6 Press Z B EJECT and insert a
recordable tape in deck B.
7 Turn off the system.
When recording starts, the volume level
is set to minimum.
To check the setting
1 Press REC.
“TIMER OFF” appears in the display.
2 Press REC again.
To change the setting, start over from step 1
on the previous page.
Wide display
Normal display
To cancel the timer operation
Press REC.
“TIMER OFF” appears in the display.
Notes
• The system turns on 15 seconds before the preset
time.
• If the system is on at the preset time, the Timer
recording will not be made.
• You cannot set the timer if the timer on and off
times are the same.
• When you set the Sleep Timer, the Timer-
recording will not start until the Sleep Timer turns
off the system.
• You cannot set the Daily Timer and Timer-
recording to be activated at the same time.
• Recording starts from the front side.
Timer-recording radio programs
(continued)
REC
DOLBY NR
VOLUME
ALL DISCS
OFF
REC
DOLBY NR
VOLUME
ALL DISCS
OFF