Filter
Top Products
13
Basic Operations
Listening to the radio
— Preset Tuning
3 Press TUNING +/– (or PRESET +/–
on the remote) to tune in the desired
preset station.
To Do this
Turn off the radio Press POWER.
Adjust the volume Turn VOLUME (or press
VOLUME +/– on the
remote).
To listen to non-preset radio
stations
Press TUNING MODE repeatedly in step 2
until “MANUAL” appears, then press
TUNING +/– to tune in the desired station.
Tips
•Pressing TUNER/BAND while the power is off
automatically turns on the power and tunes to the
last received station (One Touch Play).
•You can switch from another source to the radio
just by pressing TUNER/BAND (Automatic
Source Selection).
•If an FM program is noisy, press STEREO/
MONO so “MONO” appears in the display. There
will be no stereo effect, but the reception will
improve. Press this button again to restore the
stereo effect.
•To improve broadcast reception, move the
supplied antennas.
Frequency
Preset number
LBT-D290/D590/G3300/XB3/XB3K/XB4/XB4K
LBT-D690/XB600/XB6/XB6K
Preset number
Frequency
DISCALL
DOLBYNR
OFF
PRESET
TUNED
STEREO
MHz
S
DOLBYNR
OFF
TUNED
STEREO
PRESET
ALL DISC S
MHz
n
Before using this function, preset radio
stations in the tuner’s memory (see “Step
3: Presetting radio stations”).
1 Press TUNER/BAND repeatedly
until the band you want appears in
the display.
Each time you press this button, the
band changes as follows:
FM ˜ AM
2 Press TUNING MODE repeatedly
until “PRESET” appears in the
display.
MANUAL n AUTO n PRESET
123
PRESET +/–
TUNER/BAND
STEREO/MONO
VOLUME
VOLUME +/–
POWER