Filter
Top Products
46
GB
E:\SEM_Janet\Year2006\Revision_Data\Revision4_SF1000\JC06xxx_2661769141SF1000_GB\2
661769141\GB05AMP_HT-SF1000-CEL.fm
masterpage: Left
model name1[HT-SF1000]
model name2[HT-SS1000]
2-661-769-14
(1)
Storing FM stations
automatically
(AUTOBETICAL)
(Models of area code CEL, CEK
only)
This function lets you store up to 30 FM and
FM RDS stations in alphabetical order without
redundancy. Additionally, it only stores the
stations with the clearest signals.
If you want to store FM or AM stations one by
one, see “Presetting radio stations” (page 47).
Be sure to use the buttons on the receiver for
this operation.
1 Press ?/1 to turn off the
receiver.
2 Hold down INPUT SELECTOR
and press ?/1 to turn the
receiver back on.
“AUTO-BETICAL SELECT” appears on
the display and the receiver scans and
stores all the FM and FM RDS stations in
the broadcast area.
For RDS stations, the tuner first checks
for stations broadcasting the same
program, then stores only the ones with
the clearest signal. The selected RDS
stations are sorted alphabetically by their
Program Service name, then assigned a 2-
character preset code. For more details on
RDS, see page 48.
Regular FM stations are assigned 2-
character preset codes and stored after the
RDS stations.
When this process is finished, “FINISH”
appears on the display momentarily and
the receiver returns to normal operation.
Notes
• Do not press any button on the receiver or supplied
remote during autobetical operation, except ?/1.
•If you move to another area, repeat this procedure
to store stations in your new area.
•For details on tuning the stored stations, see
“Tuning to preset stations” (page 48).
•If you move the antenna after storing stations with
this procedure, the stored settings may no longer be
valid. If this happens, repeat this procedure to store
the stations again.
?/1
VIDEO 1 VIDEO 2 DVD
SA-CD/CD
TUNER
PRESET TUNING SOUND FIELD MUTING
AUTO CAL MIC
INPUT SELECTOR MASTER VOLUME
1,2 2
GB01COV_HT-SF1000-CEL.book Page 46 Sunday, February 12, 2006 10:44 AM